ᱪᱮᱫ ᱞᱮᱠᱟ ᱛᱮ ᱵᱽᱨᱩᱠᱞᱤᱭᱟᱨ ᱦᱟᱭᱵᱨᱤᱰ ᱵᱮᱱᱟᱣ ᱞᱟᱹᱜᱤᱫ

For most thermal equipment, to save energy and improve working conditions, heat preservation is necessary. However, the insulation of some equipment is not necessary because of the advantages and disadvantages of insulation. Therefore, the actual situation and the performance of thermal insulation bricks should be considered when choosing suitable thermal insulation bricks.

ᱞᱟᱛᱟᱨ ᱨᱮ ᱮᱢ ᱟᱠᱟᱱ ᱦᱟᱹᱴᱤᱧ ᱠᱚ ᱫᱚ ᱱᱚᱶᱟ ᱠᱚ ᱥᱮᱞᱮᱫ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ:

15 / 1) ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱫᱚ XRM ᱨᱮ ᱩᱫᱩᱜ ᱟᱠᱟᱱᱟ ᱾

᱒) ᱵᱟᱹᱲᱛᱤ ᱥᱟᱭᱠᱞᱤᱱ ᱯᱷᱤᱞᱢ ᱨᱮ ᱾

᱓) ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱜᱩᱱ ᱠᱚ

ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱ ᱜᱩᱱ ᱠᱚ ᱫᱚ ᱱᱚᱶᱟ ᱠᱚ ᱪᱮᱛᱟᱱ ᱨᱮ ᱴᱮᱦᱟᱱᱰ ᱢᱮᱱᱟᱜᱼᱟ:

1. ᱱᱚᱣᱟ ᱫᱚ ᱡᱤᱭᱚᱱ ᱨᱮ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱ ᱦᱚᱲ ᱠᱚᱣᱟᱜ ᱡᱤᱭᱚᱱ ᱨᱮ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱨᱮᱭᱟᱜ ᱫᱟᱲᱮ ᱠᱟᱱᱟ;

2005-500-ms lạgit̕, ᱟᱹᱰᱤ ᱜᱟᱱ ᱢᱮᱴᱨᱤᱠ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱟᱹᱰᱤ ᱵᱟᱹᱲᱛᱤ ᱠᱟᱹᱢᱤ ᱠᱚ ᱛᱟᱦᱮᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱵᱟᱹᱲᱛᱤ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ᱾ ᱚᱱᱟ ᱠᱷᱟᱹᱛᱤᱨ ᱛᱮ 7.5 ms ᱨᱮ ᱠᱟᱹᱢᱤ ᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱞᱚᱞᱚ ᱟᱨ ᱵᱟᱝ ᱠᱟᱹᱢᱤ ᱞᱮᱠᱟ ᱛᱮ ᱞᱚᱞᱚ ᱟᱨ ᱵᱟᱝ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ᱾

3) Due to the high porosity of insulating bricks, they cannot bear excessive load and should not directly contact molten metal, slag and high-temperature dust.

4) Insulation bricks have low strength. Brick joints and expansion joints should be properly handled to avoid damage caused by volume expansion. Insulation refractory bricks should not be subjected to strong mechanical vibration, impact and friction;

50 mm ᱠᱷᱚᱱ 10 mg ᱠᱷᱚᱱ 20 μm ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱵᱟᱹᱲᱛᱤ ᱵᱟᱹᱲᱛᱤ, ᱡᱟᱦᱟᱸ ᱫᱚ 5 mm ᱠᱷᱚᱱ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ extime lạgit̕ kạmi lạgit̕ kạmi lạgit̕ gạḍi ko kạmi kạmi lạgit̕ kạmi lạgit̕ kạmi kạmi lạgit̕ gạḍi ko kạmi kạmi kạmi kate kạmi lạgit̕ kạmi kạmi k ᱯᱮᱨᱮᱡ ᱛᱟᱦᱮᱱᱟ.