ᱠᱟᱹᱢᱤ ᱟᱨ ᱠᱟᱹᱢᱤ ᱨᱮᱭᱟᱜ ᱮᱛᱚᱦᱚᱵ ᱫᱷᱟᱯ ᱨᱮ ᱠᱟᱹᱢᱤ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱾

0.0 ms ᱨᱮ ᱢᱤᱫ ᱱᱟᱹᱢᱩᱱᱟ ᱱᱟᱹᱢᱩᱱᱟ ᱫᱚ ᱢᱤᱫ ᱚᱠᱛᱚ ᱨᱮ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱟᱨ ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱫᱚ ᱢᱮᱴᱨᱤᱠᱥ ᱫᱚ ᱢᱤᱫ ᱚᱠᱛᱚ ᱨᱮ ᱞᱚᱞᱚ ᱞᱟᱹᱜᱤᱫ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱾

ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱞᱟᱛᱟᱨ ᱨᱮ ᱮᱢ ᱟᱠᱟᱱᱟ:

1. Improve or eliminate various structural defects and residual stress caused by steel during casting, forging, rolling and welding to prevent deformation and cracking of workpieces.

{} } } } 10 } } ᱥᱴᱨᱤᱝ ᱯᱷᱟᱱᱥᱚᱱ ᱵᱮᱱᱟᱣ ᱢᱮ ᱾

{1} ᱟᱨ } } } } rpm ᱫᱚ ᱥᱟᱹᱨᱤ ᱜᱮ ᱮᱴᱠᱮᱴᱚᱬᱮ ᱥᱚᱞᱦᱮ ᱞᱟᱹᱜᱤᱫ ᱨᱚᱡᱽᱜᱟᱨᱰ ᱨᱤᱢᱚᱰᱮᱞᱤᱝ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱᱟ ᱾

{} } } } } ᱥᱴᱨᱤᱝ (᱑) ᱨᱮᱭᱟᱜ ᱥᱚᱡᱷᱮ ᱥᱚᱨᱥ, ᱥᱴᱨᱤᱝ ᱨᱮᱭᱟᱜ ᱥᱴᱨᱤᱝ ᱾

ᱠᱟᱹᱢᱤ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ: ᱯᱷᱤᱞᱢᱤᱝ

Through the circulation of the fan, the temperature distribution in the furnace chamber of the annealing furnace is uniform, and the two furnace chambers of the annealing furnace can operate independently, which improves the annealing efficiency. There are two fans in each oven chamber, but no air filter. It is different from the actual situation. The temperature distribution in the furnace is evenly distributed throughout the fan cycle, and the microstructure of the film material is reorganized by heat treatment, thereby improving stability and conversion efficiency. The castings are heated to approximately 950℃and then cooled for a certain period of time to relieve internal stress of the steel castings and welded parts. When the steel is heated, austenite is formed at temperatures below 100 to 200℃, and after cooling, it is cooled in air to ᱱᱳᱴ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱴ ᱾